In addition to individual board permissions, you can specify detailed permissions for the boards. You can open the detailed permissions settings in two ways.
First, click the edit settings icon next to the required board in the boards list.
Then open the “Advanced Setup” tab and scroll down to “Permissions.”
Alternatively, when you are already on the board page, click the edit board icon next to the board title.
Then open the “Advanced Setup” tab and scroll down to “Permissions” as described above. This is how the full block of detailed board permissions looks.
Use the “Everyone can edit settings” checkbox to provide access to the settings for all users.
The “Boards admin” field defines users with access to the board settings.
You can see here the same “Default user permissions” field with the same value you would see in the admin panel. You can add SharePoint groups to these fields or select a default access level for all users with a license.
Here are the types of detailed permissions for individual boards.
Edit—users with “edit” permission have full access to managing all the tasks of the board. They can edit all the board content, but do not have access to the board settings.
View only—users with defined “view only” permission can view the board, cards, attached files, history, and charts but cannot make any changes to them.
No access—users with “no access” permission cannot view or edit the board, cards, charts, or history. This field has higher priority than others.
Edit only own tasks—if this permission is selected, the user can edit only their own tasks (except users with “edit” permission) by default. They can create a task but cannot assign it to someone else.
Only board admins can delete boards.
A user can only be added to a single content permissions field (edit, edit only own tasks, view only, or no access). If we add a user to a field and they are already selected in another field, then an error is displayed: “User permissions are already specified.” You can assign them to edit, edit only own tasks, view only, or no access by adding the user to the corresponding list.
If you are an existing customer and your board is being migrated, the situation may arise where the board owner is not known. In these cases, we automatically enable the “Everyone can edit settings” checkbox.
Customizing user permissions in Kanban Board makes it possible to define which Kanban Board users, groups of users, departments, or divisions can access information. By defining the permissions, you can set who can and cannot see the information.
It is also possible to create per-board permissions and define default user permissions for your tenant or your specific board. Default permissions define the board permissions of a user with a license if their permissions are not configured individually.
User permissions can enable users to carry out the following actions:
view the information,
edit information,
manage settings.
To understand the logic of Kanban Board’s permissions, please keep in mind that Kanban Board visualizes the information that is stored in your SharePoint list. To edit information on the board, the user must have permission to edit and save the SharePoint list item.
Though Kanban Board’s permissions cannot exceed or override SharePoint user permissions, it can give you unprecedented flexibility and enable you to bring new essential scenarios to life.
There are three roles in the Kanban Board app:
license manager
board admin
a user with default or defined board permissions
You can manage licenses in the license center block of the settings. To open it, click the gear icon in the upper right corner and choose the “License center” tab.
You can use the license center block for these actions:
check the license status
manage the subscription (renew or upgrade it)
add licenses to users or delete licenses
add or delete individual license admins or SharePoint groups
Assigning a license does not assign user permission to the boards. A user can have a license without having access to the board if you set it up that way in the admin panel.
The complete list of users with licenses is displayed in the “Users with a license” list (scroll down in the “License center” tab to find it). You can add SharePoint user groups in this field. In addition, you will see the list of users, not a group name. You can insert numerous SharePoint groups here; each user will only be added once, so you do not need to worry about duplicates.
Enable the "Auto-assign license" feature, if you need to assign users a license automatically when they're trying to access Kanban Board Pro for the first time.
If you have an enterprise license, the “Users with a license” field does not appear because there is no limit for licenses in this case.
The slider on the right highlights users of your organization who have not used Kanban Board for some time. You can move the slider to change the time and determine whether users are inactive (they will be highlighted in red) and how long it has been since they last used the tool.
You can also export the list of users in CSV format. The list will contain the name of the licensed users, their email, and their last login time.
License managers can be added/deleted in the “License managers” block at the bottom of the license center. If the field is empty, everyone has access to license management.
This is done to simplify the migration of the existing boards into the new permissions model.
License management is available only for the users added to the “License managers” field. Here are five things about license management to keep in mind:
A license manager is not obliged to have a license. The first person handling the subscription becomes a license manager. This person can add other users or SharePoint groups as license managers as well.
If the license manager field is empty, everyone has access. The probability of this event is very low, because of the special precautions taken. If at least one license manager is added, you cannot delete them from the field. If you delete the last license manager upon saving your changes, you will be added as a license manager again. This is done to avoid the accidental deletion of all license managers.
If there is at least one user added to the license manager field and someone is trying to access the license center, they will see the message below and should request access from the license manager.
If you are not a licensing manager, you can find license managers in the “License managers” block of the license center (in the “Add and delete license managers” field).
If you accidentally lost the license admin permissions, you can request them back from any of the current License admins. For this purpose, the gear icon is always displayed. If you are not a license admin, you will only see the list of admins.
To open permissions settings, use the gear icon in the upper right corner and open the “Admin panel” tab.
For new users/accounts or while installing the trial version, the admin panel menu will open for the subscription administrator. The administrator is shown in the “Admin panel managers” field.
If you were the admin in the previous version of the permissions, you will be added as an admin panel manager.
With the new permission model, you are no longer able to delete the last admin panel manager. The current user will be automatically added to “Admin panel managers” upon refresh.
The page of admin panel settings consists of two blocks: global settings and individual board permissions.
If you are not added to the admin panel managers list, you cannot access this block of settings. If you see the following notification, please contact one of the admin panel managers; they can provide you with access.
If you accidentally lost admin panel permissions, request it back from any of the current admin panel managers (just use the gear icon in the upper right corner and open “Admin panel”).
Global settings define what actions will be available for general users for the whole Kanban Board app.
The “User avatars” setting allows using avatars from SharePoint or Office 365.
The “Tenant storage location” field displays the storage location of data needed to create the board layout. Please note that we do not store the content of your board on our side. Everything is kept on your SharePoint instance, in Microsoft’s cloud.
The “Default user permissions” field shows permissions that are set by default. For the accounts that are currently using Kanban Board, the default permission is set to “Edit” to provide compatibility. It has a “No access” value when first installed and “Edit” when the app is updated.
The “Admin panel managers” field allows you to add people who can manage the admin panel.
Remember to click “Save” if you have made any changes to the global settings to apply them.
This block consists of two fields for entering data and a search button. When you click “Filter,” the table with search results is displayed.
This field is designed to allow fast editing of multiple boards.
The table consists of four columns as follows:
Site collection with a hyperlink to the site collection
Board name with a hyperlink to the board that opens in a separate window
Board admins: users with access to board settings. There is a checkbox “Everyone can edit settings” in every cell of this column. If there are no selected users in this field, the checkbox is checked by default. If the checkbox is unchecked, the field is active and available for editing. When a new board is created, еру user on behalf of whom it is added appears in the “Board admins” field.
Default user permissions are displaying the default access settings predefined for this board.
When any changes are made to the “Board admins” or “Default user permissions” columns, the “Save” button will appear next to the changed field. Click it to save the changes in the table.
The following types of board permissions are available:
No access—users with “no access” cannot view or edit boards or lists. If they try to open the board page, an “access denied” message appears: “You do not have permission to perform this action or access this resource.”
View only—“view only” users can view the boards, cards and attached files, history, and charts. These users cannot create, delete, or clone cards.
Edit—users with “edit” permission can view, add, edit, clone, and delete board elements (cards and attachments). They can also view history and charts.
Edit only own tasks — this permission setting allows users to manage (view, edit, add, clone, and delete) assigned cards. They can view the boards, cards, attached files, history, and charts.
Pay attention to the default user permissions. If you are a board admin, you can override them for a specific board.